 ANTI-STATIC
TABLE PADS/CONDUCTIVE GROUND PADS |
|
|
Type：YY-A1001
Anti-static
table pads or conductive ground pads should be laid out
in the workshops and advanced laboratories for microelectronic
industries such as electronic semi-conduct devices,electronic
computers,electronic communication equipment and integrated
circuits etc. To eliminate damages caused by static electricity.When
anti-static table pads (ground pads) are laid out and
grounded,the working surface will discharge the static
electricity of human bodies so that a near-equipotential
can be maintained for ESEDS tweezers,tools,utensils and
instruments, through which human bodies contact the working
table and static sensitive devices(SSD) are free from
broadband interference produced by static discharging
such as triboelectrification etc. In this way, electrostatic
protection is realized.
Anti-static table pads are mainly made
of anti-static(conductive) and static-dissipative materials,and
synthetic rubber. The surface layer is a 0.5mm thick static-dissipative
layer.The bottom layer is a 1.5mm conductive layer. Generally,2mm
thick double-layer structure is used. The available colors
include green,gray,blue,black and yellow etc.*Resistivity
of surface layer：107-10Ω9
*Resistivity of bottom layer：103-10Ω5
*Rattler loss：< 0.02g/cm2
*Time for static dissipation：< 0.5S
*Length,width,thickness and colors are selectable
Conductive ground pads are made
of quality conductive material and synthetic rubber.
Resistivity of surface and bottom
layers：103Ω-105Ω.The black color
is normally used. |
|
|
|
|
|
|
Profile of anti-static table
pad
|
|
|
 |
